Sitemap | Home | Previous page

QUANTEC ADDRESSABLE CALL SYSTEM

 
The Quantec addressable call system is linkable to a programming PC, has a customised location naming facility and features a comprehensive range of monitored network devices. Please download detailed documentation in Adobe Acrobat .pdf format (shown to the right).

Other features include extremely flexible programming for system configuration; day/night settings; multiple call levels (call, help required, emergency and optional infrared staff attack) and the availability of our new sophisticated data analysis software, ‘Quantec Surveyor’.

INSTALLATION PLANNING

Although Quantec far exceeds the minimum requirements of all agencies, rules regarding installation vary depending on the location of the installation. If there is any doubt, please check with the relevant authorities. The Network Controller can be located anywhere on the network although it is usually installed centrally to reduce wiring runs or in the manager or matron's office. When not being used for programming, it operates in exactly the same way as a display.

Displays should be located strategically around the premises where they can be readily seen by staff, in areas such as nursing stations, junctions in corridors, staff rooms etc. Call Points should be sited next to each bed, preferably above bedhead height to avoid damage to them when the bed is moved. They should also be installed in lounges, dining rooms, etc. Ceiling Pulls should be fitted in each bathroom and WC. Slave Overdoor Lights (if required) are normally installed outside rooms.

If area indication or ‘follow me’ lights are required, Addressable Overdoor Lights should be positioned at the ends of corridors, above fire doors etc. Monitoring Points should be fitted close to fire exits, drug cupboards or alongsideany other area/device which needs to be monitored. Infra-red Ceiling Receivers / Call Points should be positioned in all areas which require infra-red coverage. The number and type of devices used will vary depending on the application.

The Quantec addressable call system is linkable to a programming PC, has a customised location naming facility and features a comprehensive range of monitored network devices. Please download detailed documentation in pdf format below (right click, 'save target as').

Other features include extremely flexible programming for system configuration; day/night settings; multiple call levels (call, help required, emergency and optional infrared staff attack) and the availability of our new sophisticated data analysis software, ‘Quantec Surveyor’.

 

SURVEYOR SOFTWARE

Quantec's data management software allows detailed data analysis reports to be sent direct to your computer. In addition to displaying 'real time' call, reset and room occupancy information, it allows you to produce reports on longest calls, most frequently visited rooms, busiest shifts and average call response times, etc., for any given period within the last six months and to view them in text and/or graphical form. Surveyor gives management tighter control of their care facility and is an invaluable tool for evaluating staff performance, reviewing patient demands and determining labour levels/shift patterns.

Detailed documentation
© 2007 - Fire & Security Solutions Ltd - All Rights Reserved
Jupiter House, 51 Stuart Road, Kempston, Bedfordshire, MK42 8HS, United Kingdom
Mobile: +44 (0) 7917134740 Telephone: +44 (0) 1234 910550 Email: enquiries@fireandsecuritysolutions.co.uk